X-Bar Aluminium Crossbar X00, B: 05 mm
X-Bar Aluminium Crossbar X00, B: 05 mm
X-Bar Aluminium Crossbar X00, B: 05 mm
X-Bar Aluminium Crossbar X00, B: 05 mm
Highsider

X-Bar Aluminium Crossbar X00, B: 05 mm

1 1/8 pouce, avec ABE, noir

Art. No. 10058773
|

Pas encore d’avis.

Trouvez votre moto:
89,95 € 1
Description

X-Bar Aluminium Crossbar X00, B: 05 mm 1 1/8 pouce, avec ABE, noir

The ultimate heavy-duty handlebar – not only for dirt bikes, but also for street and muscle bikes. Compensates for annoying flexing of the steering tube and offers significantly more reserves in extreme situations.

Made of high-quality aluminium (2014 T6 – extremely durable). The conical tapering (diameter: 28.6 mm) from the clamping area to the ends almost doubles the flexural rigidity against deformation. The diameter at the outer flanks is 22 mm. Available in a stylish sandblasted finish (black anodised) or highly polished (gold anodised).

Handlebar dimensions: W:805, H: 75, D: 90

Including ABE valid for Germany for the models listed there.

As part of an individual or modification approval at a technical institute (e.g. TÜV, Dekra), you can of course also mount the handlebars on other models, if possible, and have them entered in the vehicle documents. Please order the corresponding handlebar clamps for installation separately if necessary (see ‘Suitable articles’).

Note: The accessory handlebars are supplied without a hole for locking the switch unit. These are positioned differently depending on the motorcycle model. It is permissible to drill the handlebar for the lock: To do this, align your new handlebar optimally with the vehicle. Now mount the switch units, check that they are free to move towards the tank when the steering is fully turned, mark the hole for the lock and drill the handlebar to the appropriate diameter. If you want to avoid the drill slipping off the smooth steering tube when converting the handlebars, or if you tend to ‘go wrong’ when centre-punching or somehow always drill crookedly into the workpiece, you should use the LSL drilling template, order no. 10005264 (see ‘Matching articles’) – better safe than sorry, with this template such mistakes cannot happen.
Fabricant: Paaschburg & Wunderlich GmbH | Am Alten Lokschuppen 10a | 21509 Glinde | Germany | +49 402482770 | info@pwonline.de | www.pwonline.de
Documents
Évaluations
Tous les modèles
Vous avez d'autres questions?

Vous avez une question d'ordre général, une question concernant votre commande, vous souhaitez faire une critique ou simplement nous faire part de votre opinion ? Nous nous tenons à votre entière disposition.

Données personnelles

J'ai une question...

Sélectionnez une option

Choisissez votre option de contact

Sélectionnez une option

La période que vous avez programmée est invalide. Veuillez la corriger.

heures

heures

En envoyant ce formulaire, vous acceptez que vos données personnelles soient traitées conformément à notre politique de confidentialité.

Franco de port à partir de 70 €
Droit de restitution de 2 ans
Livraison rapide
Retour gratuit
SearchWishlistUser AccountCartArrow LeftArrow RightArrow Right ThinIcon HomeMenuArrowCaret DownCloseResetVISAmatercardpaypalDHLHermesCheckCheck-additionalStarAdd to Shopping Cartchevron-leftchevron-rightSpinnerHeartSyncGiftchevron-upKlarnaGridListFiltersFileImagePdfWordTextExcelPowerpointArchiveCsvAudioVideoCalendar